My son got his learner's permit and I need to log him driving for 40 hours. Does Teslafi have access to what driver's profile the car was set to when driving? If so, it would nice if it auto-tagged the drives with the profile name.

Also, I have been manually tagging his drives with his name, but when I search for drives with that tag, it just shows all of the drives. Does tag search work correctly?

Since 12/12/2019 my car only goes into sleep for a quick nap. It almost never sleeps longer than 50min anymore, wakes up for apparently no reason, and then goes into sleep after 40-45min again. First I thought it would be connected with the 2019.40.2.1 update. I reset my Tesla password and generated a new token for TeslaFi, so I would be sure that no other third party app (and even Tesla's app) doesn't interfere. That sleep pattern still showed up, so I contacted Tesla because I thought the car wakes up for some reason on its own (as I stated above, I thought it was connected with the update). However "Tesla Virtual Service" confirmed that the wake up reasons are due to a third party app. Since TesalFi was the only application at this point with a valid token... it must be TeslaFi. It is a bit surprising to me because there isn't anything visible in the raw data feed (e.g. an intended wake up call). Is this a known issue?

Here an example from 12/27/2019

Here a screenshot for the according raw data feed

My sleep settings

I would very much appreciate it if you could also switch TeslaFi to German. I would understand many better! Thank you so much!

How to correctly record free charging of Supercharge, and display cost saving?

Why do I not get a value here.  What is the saving vs gas?

Hi. Is it possible to export data from TeslaMate and import them into TeslaFi. I would like to switch to TeslaFi if this is possible.

Best wishes,

Lars

Has anyone noted since upgrading to 2019.5.x that their Model 3's are no longer sleeping?  I am loosing between 1-2 miles of range per hour since we updated to 2019.5.15 on March 12th and have not yet seen the car sleep.  Members on other forms claim that they've had to change their Tesla Passwords and invalidate the API keys as a work-around in the meantime.  Time to Try Sleeping (15), Idle Time before Trying to Sleep (30), Try to Sleep Requirement (No Shift State), Nighttime TeslaFi Sleep Mode: enabled btwn 10PM-8AM. 

I've opened a private ticket yesterday, but curious to know what the folks on the forum are seeing?

Is it possible to edit the starting address or ending address of a drive? Because I park in a parking garage, I do not have cell reception there. Sometimes my drives have me ending outside of the tagged location - sometimes blocks away. Curious how I can fix that.

Here is an example of me leaving the parking garage (large circle). Because the lack of cell reception, the car was first seen in a different location (small circle)

After each ride TeslaFi wakes the car repeatedly for 34 minutes. After this the car sleeps as expected (until next ride or until the car wakes up on its own to recharge the 12V battery).

However during these 34 minutes the high voltage relay clicks every 60s (so high voltage is enabled for 1 minute, then disabled for 1 minute).

TeslaFi setting "Idle Time Before Trying to Sleep" has direct influence on the total clicking duration. If set to 30 minutes -> 34 minutes clicking, if set to 10 minutes -> 14 minutes clicking, if set to 5 minutes -> 10min clicking.

If TeslaFi is disabled (by unchecking "Logging Enabled"), high voltage is disabled only once (2 minutes after locking the car) and not reenabled (for hours). Then only 2 clicks of the shutdown sequence are audible.

"Polling Time While Idle" was usually set to 1 minute (default). If set to e.g. 5 minutes: the car enables the HV only for 1 minute every 5 minutes (for ~30 minutes in total, after a ride only). There is one loud click which indicates HV enabling. 60s later and 120s later two quiet click indicates HV disabling.

Test conditions

• TeslaFi default settings restored by "Reset Settings"
  • Tesla Model S 2016 facelift, AP1, no sentry
  • 'Always Connected' is turned off
  • 'Energy Savings' is turned on in the vehicle.
  • 'Cabin Overheat Protection' off
  • No camping mode or dog mode enabled.
  • 'Passive Entry' off (so key fob does not wake up the car unintentionally).
  • No OBD connected
• Tesla app was stopped sometimes, but usually just closed (because no effect).
• No charger connected
• Usually good LTE connection
• 12V-battery voltage monitor (shows me e.g.: if the car is running from 12V battery or high voltage battery).
• All available software updates installed.
• Systematic TeslaFi tests performed on 2021-07-22 and 2021-07-23

I observed same clicking for ~30minutes on a Tesla Model S 2018 which also uses TeslaFi. The repeated clicking also disappeared after TeslaFi was disabled (by unchecking "Logging Enabled").

• Same settings (additionally: sentry disabled).
• No charger connected.
• No 12V-battery voltage monitor
• No OBD connected
• All software updates installed.

I probably heard this clicking for more than a month on both cars (without observing it for longer time).

Is TeslaFi aware of that problem? It is not "Car is not sleeping".

Could TeslaFi poll faster than every 60s during idle time?

Hi,

How to import CSV file data with the same architecture of teslafi to my car ? 

Thanks